Electronics search at www.epanorama.net

Pages in this site

Links listed in this site

Audio Amp Output Power Limiter Rate this link - Click here to go to page where this link is listed (/links/audiocircuits.html)
Audio Limiting Circuits - This is a limiter circuit based on Silonex linear optocoupler. Rate this link - Click here to go to page where this link is listed (/links/audiocircuits.html)
Designing A Limiter For Headphone Amplifiers - When used with headphones - especially personal monitors, audio limiters (also called clippers) can help maintain safe listening levels. Without a limiter, large transients in audio signals could generate dangerous SPLs in headphones, although the average volume might be set at an acceptable level. Because a limiter is actually a specialized form of audio compressor, the circuitry of audio limiters can vary tremendously in complexity from a pair of diodes to multi-stage voltage controlled amplifiers with split frequency bands. Diode-based limiters are instanteous, simpler in design and have a more accurate loudness response, but suffer from distortion in the clipping region. Rate this link - Click here to go to page where this link is listed (/links/audiocircuits.html)
Fast Audio Peak Limiter Rate this link - Click here to go to page where this link is listed (/links/audiocircuits.html)
Stereo Broadcast Limiter Circuit for Ramsey FM10A and FM25A transmitters Rate this link - Click here to go to page where this link is listed (/links/audiocircuits.html)
Philips' Dynamic Noise Limiter - This four transistor circuit is claimed to be developed by Philips to improve the subjective signal-to-noise ratio of cassette reproduction. It works on playback only and therefore can be used with any source material. Indeed, it can improve the sound of not only tape playback but any source where broadband noise (hiss) is troublesome - noisy radio signals are examples. Rate this link - Click here to go to page where this link is listed (/links/audiocircuits.html)
Vintage Radio Repair and Restoration Projects - valve radio power supply, audio output meter, capacitor reformer, series lamp limiter, RF signal generator Rate this link - Click here to go to page where this link is listed (/links/circuitsites.html)
Series Lamp Limiter - connect a 100W lamp bulb in series with the supply to the equipment being repaired to avoid very nasty high short circuit current is something goes seriously wrong, useful for power supply testing and repairing Rate this link - Click here to go to page where this link is listed (/links/measuring.html)
13.8V 20A power supply - Regulated DC power supply, short circuit safe, and with current limiter. This PSU has been especially designed for current-hungry ham radio transceivers. It delivers safely around 20Amps at 13.8V. For lower currents, a separate current limiting output, capable of 15ma up to a total of 20A has been added. The base of this design is a simple 12V regulator (7812) and power transistors. Rate this link - Click here to go to page where this link is listed (/links/psu_linear.html)
0-30 VDC Stabilized Power Supply With Current Control 0.002-3A - This is a high quality power supply with a continuously variable stabilised output adjustable at any value between 0 and 30VDC. The circuit also incorporates an electronic output current limiter that effectively controls the output current from a few milliamperes (2 mA) to the maximum output of three amperes that the circuit can deliver. This feature makes this power supply indispensable in the experimenters laboratory as it is possible to limit the current to the typical maximum that a circuit under test may require, and power it up then, without any fear that it may be damaged if something goes wrong. There is also a visual indication that the current limiter is in operation so that you can see at a glance that your circuit is exceeding or not its preset limits. Rate this link - Click here to go to page where this link is listed (/links/psu_linear.html)
Series Lamp Limiter - connect a 100W lamp bulb in series with the supply to the equipment being repaired to avoid very nadty high short circuit current is something goes seriously wrong, useful for power supply testing and repairing Rate this link - Click here to go to page where this link is listed (/links/psu_misc.html)
Current limiter provides latch-up signal - current-limiting circuit both signals a latch-up condition and prevents latch-up-induced overcurrent destruction of a CMOS IC or group of ICs Rate this link - Click here to go to page where this link is listed (/links/psu_monitor.html)
Series Lamp Limiter - connect a 100W lamp bulb in series with the supply to the equipment being repaired to avoid very nadty high short circuit current is something goes seriously wrong, useful for power supply testing and repairing Rate this link - Click here to go to page where this link is listed (/links/psu_monitor.html)
Micro Power FM Broadcasting Circuits - accessories to transmitter circuits: audio limiter, audio mixer, antenna and essential modifications for Ramsey FM10 Rate this link - Click here to go to page where this link is listed (/links/radio.html)
The Grenade Transmitter - This is shortwave transmitter based on The Animal's infamous "Grenade" design. It operared at 12-14V power and outputs up to 10W AM transmission at 40 meter frequency area (6000-8000 Kilohertz). This design uses crystal to define the transmitting frequency and has limiter/compressor in the audio input. Rate this link - Click here to go to page where this link is listed (/links/radio.html)
FM Pre-Emphasis - FM broadcasting in the United States requires a 75us pre-emphasis for proper frequency response at the receiver. This is a high-precision pre-emphasis module that goes in front of the main broadcast limiter, but after the optional sibilance limiter. Rate this link - Click here to go to page where this link is listed (/links/radio.html)
Micro Power FM Broadcasting Circuits - limiter, mixer, antenna, modifications to Ramsey FM10 Rate this link - Click here to go to page where this link is listed (/links/radio.html)
Series Lamp Limiter - connect a 100W lamp bulb in series with the supply to the equipment being repaired to avoid very nadty high short circuit current is something goes seriously wrong, useful for power supply testing and repairing Rate this link - Click here to go to page where this link is listed (/links/repair.html)

Found 18 links

Electronics search at www.epanorama.net

Pages in this site

Documents in schematics for free archive

Links listed in this site

More search actions with keyword limiter