IoT and embedded products 2019

This post is here to comments links and news on intetesting IoT and embedded systena products I see on news.

683 Comments

  1. Tomi Engdahl says:

    Update: Onion Releases Omega2 Pro IoT Development Board
    https://blog.hackster.io/update-onion-releases-omega2-pro-iot-development-board-409c5b38616e

    the Omega2 Pro, which is a self-contained platform with the processor, memory, storage, and Wi-Fi radio baked into a single board. Onion states it will come pre-loaded with OpenWrt and can be programmed in nearly any language, including Python, GoLang, NodeJS, C++, PHP, and a host of others.

    https://onion.io

    Reply
  2. Tomi Engdahl says:

    The Mysterious ESP-EYE Development Board from Espressif?
    https://blog.hackster.io/the-mysterious-esp-eye-development-board-from-espressif-2d5b4ffd2b9

    Sometimes new boards pop up on the radar almost entirely out of the blue, like the new Espressif ESP-EYE has done

    “…this is Espressif’s new AI development board featuring voice wakeup, as well as face detection and recognition. It has been built around our flagship chip, ESP32, and it is also equipped with a 2-Megapixel OV 2640 Camera, Microphone, 4 MB Flash, 8MB PSRAM, Micro USB and LED lights on a 21mm × 41mm board.”

    https://www.cnx-software.com/2019/01/02/esp-eye-esp32-ai-development-board/

    Reply
  3. Tomi Engdahl says:

    Analog Devices – Dev board can connect to any equivalent Arduino MCU controller boards (Analog Devices EVAL-M355-ARDZ-INT)
    https://www.electropages.com/2019/01/analog-devices-dev-board-connect-equivalent-arduino-mcu-controller-boards/?utm_campaign=2019-01-07-Analog-Devices&utm_source=newsletter&utm_medium=email&utm_term=article&utm_content=Analog+Devices+-+Dev+board+can+connect+to+any+equivalent+Arduino+MCU+

    Analog Devices EVAL-M355-ARDZ-INT Development Board is designed for fast and simple connection to ADuCM355-based sensor boards. The board can also connect to any equivalent Arduino MCU controller boards. This provides for testing functionality, and performance of the circuit using a controlled evaluation environment.

    Reply
  4. Tomi Engdahl says:

    NGK contributing to the spread of IoT devices through new ceramic Li-ion rechargeable Batteries
    https://www.eetimes.com/document.asp?doc_id=1334093

    Ultra-small, ultra-thin, high-capacity and capable to be installed at high temperatures, the EnerCera line of rechargeable Li-ion batteries is looking to change up the market for IoT devices by being adaptable to current manufacturing processes while allowing wireless communication.

    Reply
  5. Tomi Engdahl says:

    Anavi Technology Unveils ESP8266-Powered Thermometer Dev Board
    https://blog.hackster.io/anavi-technology-unveils-esp8266-powered-thermometer-development-board-6bc54f8aef1a?fbclid=IwAR02dASjx7Yu1TBPcNtHeJDagyq16N7NWbzLArS3NgyMF9LzerCXyQ4ie3Y

    the Anavi Thermometer — an ESP8266-based board outfitted with a DHT22 temp/humidity sensor that can be utilized for everything from monitoring fish tanks to home automation.

    https://www.crowdsupply.com/anavi-technology/anavi-thermometer

    Reply
  6. Tomi Engdahl says:

    $16 Raspberry Pi Case Features LCD Touchscreen and Stylus
    https://blog.hackster.io/16-raspberry-pi-case-features-lcd-touchscreen-and-stylus-ac307ba3498f

    There are a ton of cases on the market for the Raspberry Pi, some even equipped with cooling fans, heatsinks, and even displays. While most of those can be had for reasonably cheap, those equipped with display or touchscreens can run on the expensive side- costing $20 and up depending on the model.

    Reply
  7. Tomi Engdahl says:

    ANNOUNCING DEVICE OS 1.0 AND RELEASE GUIDELINES FOR PRODUCT CREATORS
    https://blog.particle.io/2019/01/10/announcing-device-os-1-0-and-release-guidelines-for-product-creators/

    announce the release of Device OS v1.0.0, now available in the Web IDE and in the Device OS code repository.

    Device OS is our lightweight operating system designed specifically for embedded IoT devices that makes possible many of the features that our customers have come to rely on: out-of-box security, seamless over-the-air (OTA) firmware updates, and an abstraction layer that makes sending a fleet-wide message as simple as writing Particle.publish().

    Reply
  8. Tomi Engdahl says:

    SBC serves as industrial IoT gateway
    https://www.edn.com/electronics-products/other/4461447/SBC-serves-as-industrial-IoT-gateway?utm_source=Aspencore&utm_medium=EDN&utm_campaign=social

    Running under Linux, the TS-7180 single-board computer (SBC) from Technologic Systems is useful for industrial control automation and remote monitoring management

    Reply
  9. Tomi Engdahl says:

    Wiliot Promises Battery-Free Bluetooth Sticker with Integrated Processor and Sensors
    https://blog.hackster.io/wiliot-promises-battery-free-bluetooth-sticker-with-integrated-processor-and-sensors-60a3cde8fc8b

    Semiconductor startup Wiliot recently announced it had gained 430-million in series B funding ($50 million total) to continue its development of battery-free Bluetooth Sensor Tag, which siphons electromagnetic energy from RF sources, including Wi-Fi, cellular, and Bluetooth networks for power. Financial backers include Amazon, Samsung, and Avery Dennison, among a host of others.

    First Battery-Free Bluetooth® Sticker Sensor Tag Demonstrated at NRF
    https://www.wiliot.com/blog/bround

    Reply
  10. Tomi Engdahl says:

    5 Facts You Must Know About Google’s AIY Kits
    https://www.designnews.com/electronics-test/5-facts-you-must-know-about-googles-aiy-kits/146803064660007?ADTRK=UBM&elq_mid=7086&elq_cid=876648

    Google’s Artificial Intelligence Yourself (AIY) kits can be a great introduction to AI and machine learning concepts. Here’s a breakdown of five key features you should know about.

    Reply
  11. Tomi Engdahl says:

    Meet Misty II: The Robot As a Platform, Not a Tool
    https://www.designnews.com/electronics-test/meet-misty-ii-robot-platform-not-tool/13927339660055?ADTRK=UBM&elq_mid=7086&elq_cid=876648

    Misty II is a development platform for engineers and makers that was created to change how we think about robots.

    Misty Robotics says Misty II is a development platform, not just another personal robot.

    Boulder, Colorado-based Misty Robotics’ upcoming product, Misty II, is a 2-ft-tall, 6-lb robot. It is designed to do what the smartphone has done for mobile app developers, but for robotics engineers and makers—provide access to powerful features to open up the robot for a variety of applications. At its core, Misty II is driven by a deep learning processor capable of a variety of machine learning tasks, such as facial and object recognition, distance detection, spatial mapping, and sound and touch sensing. Developers can also 3D print (or even laser cut or CNC machine) custom parts to attach to Misty to expand its functionality for moving and manipulating objects. Misty II will also feature USB and serial connectors as well as an optional Arduino attachment to allow for hardware expansion with additional sensors and other peripherals. (One planned for release by the company is a thermal imaging camera.)

    Reply
  12. Tomi Engdahl says:

    SBC is Useful for Industrial Control Automation
    https://www.eeweb.com/profile/eeweb/news/sbc-is-useful-for-industrial-control-automation

    Running under Linux, the TS-7180 single-board computer (SBC) from Technologic Systems is useful for industrial control automation and remote monitoring management, including unmanned control rooms, automatic asset management, and asset tracking. Powered by a low-power NXP i.MX6 UltraLite processor with multimedia support, the TS-7180 comes in two configurations with either 512 Mbytes or 1 Gbyte of RAM.

    Reply
  13. Tomi Engdahl says:

    Macchina’s SuperB Is an ESP32-Based Module with an XBee Form Factor
    https://blog.hackster.io/macchinas-superb-is-an-esp32-based-module-with-an-xbee-form-factor-9b67c024be3e

    Macchina describes the SuperB as “the marriage of two of hardware’s ubiquitous names — the ‘Bee’ form factor and ESP32. The Bee form factor was derived from Digi’s XBee industrial grade IoT boards.”

    https://www.crowdsupply.com/macchina/superb/

    Reply
  14. Tomi Engdahl says:

    Three New Seeed Studio W600-Based Wireless Boards
    https://blog.hackster.io/three-new-seeedstudio-w600-based-wireless-boards-347c8ec21d47

    the first ESP competitor that I’d seen announced which actually retailed cheaper than the Espressif ESP8266 and ESP32 modules.

    today, Seeed Studio announced a new module, and two new development boards, built around the same chip as the Air 602 modules we saw at the tail end of 2018.

    Based around the same WinnerMicro W600, an Arm Cortex-M3 with 1MB of Flash on chip with 2.4GHz support, the new W600 wireless module is an FCC and CE pre-certified Wi-Fi module.

    Reply
  15. Tomi Engdahl says:

    Dual-radio kit sparks IoT creativity
    https://www.edn.com/electronics-products/other/4461498/Dual-radio-kit-sparks-IoT-creativity?utm_source=Aspencore&utm_medium=EDN&utm_campaign=social

    STMicroelectronics’ STEVAL-FKI001V1 development kit helps build IoT products based on Sigfox, Bluetooth Low Energy (BLE), and sub-1-GHz technologies. It allows designers to move quickly from early concept to prototyping, field trials, and volume production of such devices as smart sensors, finders, and trackers.

    Reply
  16. Tomi Engdahl says:

    The Exo Sense Py is a new indoor environmental sensor based on Pycom platform, supporting Wi-Fi, Bluetooth, Sigfox, LoRa, LTE-M, and NB-IoT.

    https://www.sferalabs.cc/blog/introducing-new-exo-sense-py/

    Reply
  17. Tomi Engdahl says:

    SBC is Useful for Industrial Control Automation
    https://www.eeweb.com/profile/eeweb/news/sbc-is-useful-for-industrial-control-automation

    Running under Linux, the TS-7180 single-board computer (SBC) from Technologic Systems is useful for industrial control automation and remote monitoring management, including unmanned control rooms, automatic asset management, and asset tracking. Powered by a low-power NXP i.MX6 UltraLite processor with multimedia support, the TS-7180 comes in two configurations with either 512 Mbytes or 1 Gbyte of RAM.

    The board also packs 4 Gbytes of eMMC MLC flash memory that can be configured as 2 Gbytes of pseudo-SLC for enhanced system integrity. A 16-kbit FRAM provides nonvolatile storage that allows reliable data retention without the complexities, overhead, and system-level reliability problems of EEPROM. Additionally, TS-SILO supercapacitors provide up to 30 seconds of reserve power in the event of a power failure, enabling safe system shutdown.

    https://www.embeddedarm.com/products/TS-7180

    Reply
  18. Tomi Engdahl says:

    Avnet Azure Sphere Starter Kit Delivers Secure IoT Edge Devices
    https://www.eeweb.com/profile/eeweb/news/avnet-azure-sphere-starter-kit-delivers-secure-iot-edge-devices

    Avnet debuts its new Azure Sphere MT3620 Starter Kit at CES 2019. The kit supports prototyping of IoT implementations using Microsoft’s Azure Sphere, an end-to-end solution (from silicon to the cloud) for creating secure connected microcontroller devices.

    The kit includes a small form factor carrier board and the Avnet-developed Azure Sphere module with Wi-Fi connectivity, based on the MT3620 reference development board.

    http://cloudconnectkits.org/product/azure-sphere-starter-kit

    Reply
  19. Tomi Engdahl says:

    Arduino and Google launch new Arduino Education Science Kit!
    https://blog.arduino.cc/2019/01/24/arduino-and-google-launch-new-arduino-education-science-kit/?arduino

    The Arduino Science Kit Physics Lab, developed in collaboration with Google, is the first official Arduino kit designed for middle school curriculum.

    The Arduino Science Kit Physics Lab provides middle schoolers (ages 11 to 14) with a hands-on experience, enabling them to explore forces, motion, and conductivity with their classmates.

    https://store.arduino.cc/physics-lab

    Reply
  20. Tomi Engdahl says:

    Fossasia’s PSLab Puts an Open Source Electronics Lab in Your Pocket (Updated)
    https://blog.hackster.io/fossasias-pslab-puts-an-open-source-electronics-lab-in-your-pocket-updated-d427c22bb552

    Fossasia’s Pocket Science Lab (PSLab) is a tiny board outfitted with a myriad of sensors and measurement tools that allow students and hobbyists alike to perform science and engineering experiments.

    https://pslab.io

    Reply
  21. Tomi Engdahl says:

    “Rather significantly, the [Seeed Studio W600] board will ship with support for both the Arduino development environment and MicroPython.”

    Three New Seeed Studio W600-Based Wireless Boards
    https://blog.hackster.io/three-new-seeedstudio-w600-based-wireless-boards-347c8ec21d47?fbclid=IwAR3dnlC8_crjBB-jStbbqLLLbwin8odfG6PSF29DS4WXUYjliTfTrOZNWtQ

    first ESP competitor that I’d seen announced which actually retailed cheaper than the Espressif ESP8266 and ESP32 modules.

    Reply
  22. Tomi Engdahl says:

    Compute Module Datasheet
    https://www.raspberrypi.org/documentation/hardware/computemodule/datasheet.md

    The latest version of the Compute Module is the CM3+. This is the recommended Compute Module for all current and future development.

    CM3+/8GB – Single Board Computer, Raspberry Pi Compute Module 3 +, BCM2837B0 SoC, 8GB eMMC Memory
    https://uk.farnell.com/raspberry-pi/cm3-8gb/raspberry-pi-compute-module-3/dp/2989462

    The Raspberry Pi Compute Module 3 + (CM3+) are DDR2-SODIMM-mechanically-compatible System on Modules (SoMs) containing a processor, memory, eMMC Flash (except “Lite” version) and supporting power circuitry. These modules allow a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition the modules have extra I/O interfaces over and above what is available on the Raspberry Pi model A/B boards, providing more options and fostering rapid development for the designer. The Compute Module 3 + 8GB has a 200 pin SODIMM design and contains 8GB of on-board eMMC flash memory.

    Broadcom BCM2837B0 Cortex-A53 64-bit 1.2GHz SoC
    1GB LPDDR2 SDRAM Memory
    8GB eMMC flash memory storage on-board
    Production life guaranteed until January 2025
    H.264, MPEG-4 decode (1080p30), H.264 encode (1080p30), OpenGL ES 1.1, 2.0 graphics
    Compatible with NOOBS_3_0_0

    Reply
  23. Tomi Engdahl says:

    DIN Rail Mounted Embedded Computer System
    https://www.men.de/din-rail-systems/

    Build a customized computer system perfectly suited for your specific application by combining functions from a selection of DIN Rail mountable modules.

    Reply
  24. Tomi Engdahl says:

    https://www.beckhoff.fi/many-core-cx/

    With the new CX2000 series Embedded PCs, Beckhoff offers many-core processing power in a DIN rail-mountable format. This new performance class leverages Intel® Xeon® D processors with 4, 8 and 12 CPU cores, enabling extremely powerful controllers in an exceptionally compact design. This new dimension of performance, which has already been demonstrated in the C6670.

    Reply
  25. Tomi Engdahl says:

    Tiny Cheap ARM Boards Get WiFi
    https://hackaday.com/2019/01/28/tiny-cheap-arm-boards-get-wifi/

    This product seems to be the followup and/or refinement of the Air602 WiFi Development board released by Seeed late last year. While the module itself grew a few more castellated pins and an RF can, the other specs look to be the same. Compared to the ESP-8266, which this module is obviously competing against, the Air600 is more than capable of pulling its own weight with five GPIO pins that do PWM, a decent amount of Flash, and all the WiFi support you could want.

    Reply
  26. Tomi Engdahl says:

    Maxim Integrated Introduces Chip That Safeguards Data by Erasing It
    https://www.electronicdesign.com/analog/maxim-integrated-introduces-chip-safeguards-data-erasing-it?NL=ED-003&Issue=ED-003_20190130_ED-003_754&sfvc4enews=42&cl=article_2_b&utm_rid=CPG05000002750211&utm_campaign=23018&utm_medium=email&elq2=3499051e3d174d4c8a5be3483c41286f

    Maxim Integrated’s latest line of chips serve as security supervisors for embedded devices, encrypting data for the central processor while preventing physical tampering with the device. The Silicon Valley company aims to make it easier for customers to add stronger security to Internet of Things devices. The challenge has been doing so without adding too much cost.

    The chips support cryptography technologies ranging from the data encryption standard (3DES) to the advanced encryption standard (AES), among others. The company also designed the chips to thwart hackers that have physical access to the hardware and can swipe secretive data by tampering with it. These attacks aim to uncover the cryptographic keys used to lock down all the device’s other data.

    The chips contain tiny temperature and voltage sensors to detect any unauthorized tampering, according to Maxim Integrated. They also have a small amount of secure storage for stashing sensitive scraps of data, including cryptographic keys. If anyone attempts to physically dissect the device, the stored data is immediately erased to prevent it from being stolen, the company said.

    The MAX36010 and MAX36011 cost around 20 percent less than the parts they replace and can be designed into devices 60 percent faster, according to Maxim Integrated.

    “The exponential growth of Internet of Things devices will continue on its upward trend,” Julian Watson, senior analyst at IHS Markit, said in a statement.

    Reply
  27. Tomi Engdahl says:

    Dual-radio kit sparks IoT creativity
    https://www.edn.com/electronics-products/other/4461498/Dual-radio-kit-sparks-IoT-creativity?utm_source=Aspencore&utm_medium=EDN&utm_campaign=social

    STMicroelectronics’ STEVAL-FKI001V1 development kit helps build IoT products based on Sigfox, Bluetooth Low Energy (BLE), and sub-1-GHz technologies.

    Reply
  28. Tomi Engdahl says:

    Avnet Azure Sphere Starter Kit Delivers Secure IoT Edge Devices
    https://www.eeweb.com/profile/eeweb/news/avnet-azure-sphere-starter-kit-delivers-secure-iot-edge-devices

    Avnet debuts its new Azure Sphere MT3620 Starter Kit at CES 2019. The kit supports prototyping of IoT implementations using Microsoft’s Azure Sphere, an end-to-end solution (from silicon to the cloud) for creating secure connected microcontroller devices.

    The kit includes a small form factor carrier board and the Avnet-developed Azure Sphere module with Wi-Fi connectivity, based on the MT3620 reference development board. It also includes a variety of expansion interfaces

    https://www.electronicproducts.com/Internet_of_Things/Avnet_releases_Azure_Sphere_Starter_kit.aspx

    Reply
  29. Tomi Engdahl says:

    A Science Lab In Your Pocket?
    https://hackaday.com/2019/01/31/a-science-lab-in-your-pocket/

    Since even the cheapest phone or computer now has plenty of horsepower, there’s been a move to create instruments that can do everything, using a reasonably simple front end and crunching data back on the host device. This is one of those tasks that seems easy, but doing it well turns out to be a lot of effort. One we recently noticed was Pocket Science Lab — a board that connects to your PC or Android phone and provides an oscilloscope, a logic analyzer, a wave generator, a power supply, a multimeter, and a few odd items such as an accelerometer, barometer, compass, and lux meter. The cost is about $65, so it isn’t a big investment. But what can it do? Read on, or you can watch the video below from Geekcamp Singapore.

    The datasheet shows a reasonable device, although nothing amazing. The oscilloscope has 4 channels but only does 2 MSPS, so assuming the front end can handle it, you might visualize 1 MHz sine waves. There’s also a 12-bit voltmeter, three 12-bit power supplies with different ranges, a 4 MHz 4 channel logic analyzer, two sine or triangle wave generators, 4 PWM outputs, and the ability to measure capacitance. Finally, there’s a frequency counter that’s good to 16 MHz.

    https://pslab.io/

    Reply
  30. Tomi Engdahl says:

    This Tiny Router Could be the Next Big Thing
    https://hackaday.com/2019/02/01/this-tiny-router-could-be-the-next-big-thing/

    It seems like only yesterday that the Linksys WRT54G and the various open source firmware replacements for it were the pinnacle of home router hacking. But like everything else, routers have gotten smaller and faster over the last few years. The software we run on them has also gotten more advanced, and at this point we’ve got routers that you could use as a light duty Linux desktop in a pinch.

    But even with no shortage of pocket-sized Linux devices in our lives, the GL-USB150 “Microrouter” that [Mason Taylor] recently brought to our attention is hard to ignore. Inside this USB flash drive sized router is a 400 MHz Qualcomm QCA9331 SoC, 64 MB of RAM, and a healthy 16 MB of storage; all for around $20 USD. Oh, and did we mention it comes with OpenWRT pre-installed? Just plug it in, and you’ve got a tiny WiFi enabled Linux computer ready to do your bidding.

    On his blog [Mason] gives a quick rundown on how to get started with the GL-USB150, and details some of the experiments he’s been doing with it as part of his security research

    Weaponizing a Micro Router for Penetration Testing
    https://dkelabs.com/weaponizing-a-micro-router/

    Reply
  31. Tomi Engdahl says:

    Mycroft Mark II: The Open Voice Assistant
    https://www.arrow.com/en/indiegogo/2336257/mycroft-mark-ii-the-open-voice-assistant

    The open answer to Amazon Echo, Mycroft brings you the power of voice while maintaining your privacy

    Reply

Leave a Comment

Your email address will not be published. Required fields are marked *

*

*