I had a Huawei MediaPad T3 10″ (AGS-L09) tablet with broken glass. The repair at the official repair center costs more than buying a new tablet (both around 150 Euros), so repairing does not make much sense. How about a DIY repair for broken screen? It seems to be doable according to several repair videos. →
I have had this cheap USB endoscope for few years. Then it suddenly stopped working. So I opened it up to see what is inside and hopefully fix to work again. The problems seems to be loose green wire. A bit of soldering and it works again. Not much electronics. Just wiring from USB connector →
Biltema sold this ground fault interrupter (RCD / GFCI) device few years ago (does not seem to sell anymore). It is designed to be connected to 230V AC 50 Hz electrical outlet. The information on the back of the device tells that this will trip at 30 mA leakage current. The symbol tells that this →
Here is a story of one cheap HDMI digitizing device. I have wanted to connect devices with HDMI output Open Broadcast Studio video mixer/streaming software running on PC. Usually HDMI to USB adapters are expensive boxes (around $100 or more). But the I saw this really cheap (€16,15 / US$ 18.99) Mini Portable HD USB →
Found this from eBay for about 2 dollars: New Mini Handy 2~150mA LED Tester Test Box for Light-emitting Diode Bulb Lamp Description: 100% brand new and high quality Material: Plastic Color: White Handy device for testing LED’s. Simply plug your LED into the correct holes (all of which are marked) and push the button to →
Helvar TS300 light dimmer is designed to dim incandescent light bulbs that are powered from 220-230V 50Hz AC power source. It is designed to be installed to wall in place of light switch. This is an old device that might not have been sold for ages. Once this type of dimmer was quite common on →
Old Phoenix Contact terminals with gas tube based surge protection. →
Here is view to an old surge protection terminal. Overvoltage gets directed through 1K5 surge protector to hopefully well grounded DIN rail this terminal is plugged to (component wire makes contact with metallic DIN rail). →
Here is teardown of one cheap car USB charger. It failed after few years of use. Outside Inside Electronics As you can see the fail was in soldering that connected two circuit boards. The fail had ripped of solder pads from circuit board. The soldering quality on some other places also questionable. There is simple →
Is Samsung Galaxy S9+ the fanciest Android phone at the moment? Only teardown will tell if this phone is a true contender, or just a weird AR Emoji machine. Read Samsung Galaxy S9+ Teardown by iFixit: two blades for changing aperture versus the usual five on normal cameras; battery, iris scanner, front cam are basically →