You can buy a whole lot of cheap hardware in 19″, and arguably, that’s where you can get the best hardware for your dollar. Many a hackerspace has used these tables for makeshift infrastructure, permanent in all but intent. So, in case some of us missed the memo, now you are aware of yet another, underappreciated solution for mounting all these servers we get for cheap when yet another company replaces its equipment – or undergoes a liquidation. If LackRack hasn’t been on your radar – what have you been using for housing your rackmount hardware collection?

https://wiki.eth0.nl/index.php/LackRack

The standard (EIA-310-D) sets it as 10-32 or 6mm if tapped or square for inserts. But I imagine there may be stuff out there not set to the standards …

10-32 is most common in AV applications. But 12-24 is common in data applications.

But the heads can be Phillips, Robertson, torx, security torx, even flathead.

IKEA Table 3D Printer
http://hackaday.com/2016/12/22/ikea-table-3d-printer/

In this Instructable, [Wayne Mason-Drust] shares the step by step guide on how to make a cool, good-looking, 3D printer based on the Ikea LACK table. From an Ikea lantern weather station to a fully printed CNC based on an Ikea table, it’s almost safe to say that a 3D printer Ikea hack was overdue.

The idea to use a Ikea table as a base for a 3D printer first came to [Wayne] as he used this table to support other 3D printer he had working in his business.

PRINTTABLE the Affordable, Attractive IKEA Lack Table Hack to create a 3D Printer
http://www.instructables.com/id/PRINTTABLE-the-Affordable-Attractive-IKEA-Lack-Tab/

Ultra Simple 2×4 Server Rack
http://hackaday.io/project/318-ultra-simple-2×4-server-rack

It doesn’t get any easier or cheaper than this. Build a 4ft tall server rack from 2×4 BigBox hardware lumber.

This project uses four cheaply available 2×4 boards and assembles them into a 4-foot-tall rack mount frame, suitable for housing generic 19″ rack hardware. Wood is great: it’s abundant, light, and strong. Heck, it even grows on trees!

Probably the biggest selling point of this setup is that it can be assembled for under $20.

Define: 19″ Rack
http://www.server-racks.com/19-rack.html