Today I’m pleased to announce a step in that direction: working with the Raspberry Pi Foundation, effective immediately there’s a pilot release of the Wolfram Language—as well as Mathematica—that will soon be bundled as part of the standard system software for every Raspberry Pi computer.

In effect, this is a technology preview: it’s an early, unfinished, glimpse of the Wolfram Language. Quite soon the Wolfram Language is going to start showing up in lots of places, notably on the web and in the cloud. But I’m excited that the timing has worked out so that we’re able to give the Raspberry Pi community—with its emphasis on education and invention—the very first chance to put the Wolfram Language into action.

And with Raspberry Pi there’s something else too: immediately being able to interact with the outside world. Being able to take pure code, and connect it to sensors and devices that do things.

I think it’s pretty amazing that we’re now at the point where all the knowledge and computation in the Wolfram Language can run in a $25 computer.

The command-line Wolfram Language is quite zippy on the Raspberry Pi. The full notebook interface to Mathematica—requiring as it does the whole X Window stack—can be a trifle sluggish by modern standards (and we had to switch a few things off by default, like our new Predictive Interface, because they just slowed things down too much). But it’s still spectacular: the first time Mathematica has been able to run at all on anything like a $25 computer.

And it’s the whole system. Nothing is left out. All 5000+ Wolfram Language functions. All capabilities of Mathematica and its notebook interface.

For me, one of the most striking things about having all this on the Raspberry Pi is how it encourages me to try a new style of real-world-connected computing.

“Working with the Raspberry Pi Foundation, effective immediately, there’s a pilot release of the Wolfram Language — as well as Mathematica—that will soon be bundled as part of the standard system software for every Raspberry Pi computer.”

“the project has sold more than two million boards. Raspberry Pi is anything but alone in the tiny, hackable computer world (all kinds of other options, from Arduino to the x86-based Minnowboard, are out there, and all have their selling points),”

The Raspberry Pi foundation has announced that it has sold two million of the tiny computers.

The milestone is remarkable because two million is a nicely large number but more so because the Pi guys have noticed that sales are accelerating ahead of projections.

Back in the day of the board computers of the late 1970s – your Scrumpi, your Nascom 1, your UK-101 et al – it was customary to build a case for it out of wood. If you were a better equipped “constructor” – what we used to call “makers” in those days – you’d build a box out of metal.

Skip forward 30-odd years and history is repeating itself. The Raspberry Pi is a board computer just like those 1970s offerings, only more powerful, more compact and with better programming facilities than the machine code monitors of yore. Some people even make their own cases, though there’s no shortage of plastic off-the-shelf offerings.

The Fuze is, quite simply, a large, keyboard-equipped case for the Pi that’s aimed less at kids learning to code

The whole thing looks a late 1970s/early 1980s micro. It’s a large, metal box with full-size chiclet-style keyboard built in

Inside the case you’ll also find a 4GB SD card pre-loaded with an OS that boots straight to the desktop and guides you to – get this – a Basic interpreter. So even if you’re not particularly interested in electronics, you can spend endless hours reliving your youth by hacking away in Basic.

Fuze Basic is a commercial version of Gordon Henderson’s Return to Basic interpreter. If you’ve used the popular WiringPi system, you’ll be familiar with Gordon’s work

The WiringPi connection is handy, because it means Fuze Basic is ready equipped with a number of GPIO-related commands for reading and writing to specific pins, both digital and analog. That allows you do control electronics projects prototyped on the Fuze’s breadboard right in Basic.

I’d also have liked to see the GPIO breakout board marked with more information than pin numbers. It really should make clear which are the I2C, UART, SPI and CLK pins, for instance.

Merely as a Pi-less case, the Fuze will set you back £70; £90 if you get it with the breadboard and a PSU too.

The Raspberry Pi was conceived of as a device so cheap that anyone could buy one, but also just raw enough that putting the computer to work would require users to learn a little about topics like installing operating systems and confronting BIOS settings.

It turns out that “put some people off” to the extent they shelved their Pis, according to the Pi Guys, as they’ve summoned a new tool called New Out Of Box Software (NOOBS) into existence so that getting a Pi up and running is much easier.

NOOBS comes as a .Zip file that, once unpacked to a SD card, will allow users to boot their Pi and chose from a list of operating systems they wish to run on the computer.

Importantly, this can all happen without network access on the Pi (downloading NOOBS on some other machine will need a network, of course).

NOOBS installs users’ preferred OS onto the SD card and stays on that card so users can continue to access the graphical editor it offers for config.txt.

NOOBS has taken pride of place on the Pi’s downloads page , where it is now the “recommended” download.

“While Wayland/Weston 1.1 brought support to the Raspberry Pi merely a month ago, work has recently been done to bring true hardware-accelerated compositing capabilities to the RPi’s graphics stack using Weston. ”

Rather than using the OpenGL ES hardware, the new compositor implementation uses the SoC’s 2D scaler/compositing hardware

Raspberry Pi users have another operation system option, after the folks behind Fedora Linux changed their recipe and issued a “remix” of the OS for the tiny computer.

Pidora 18, as the release is known, is not the very first of its kind, as two previous versions are available but weren’t optimised for the ARMv6 architecture. Pidora 18 has undergone that optimisation and is therefore ready to run on the Pi.

The use of the term “remix” is important because the Fedora folk point out it denotes the release includes “proprietary software provided by the Raspberry Pi Foundation and the SOC vendor Broadcom cannot be included directly in Fedora.” Those who would rather their Pi OS conform to higher standards of OS purity will therefore have to look elsewhere.

Almost all of the Fedora 18 package set available via yum(thousands of packages were built from the official Fedora repository and made available online)

C, Python and Perl programming languages available and included in the SD card

Includes libraries capable of supporting external hardware such as motors and robotics (via GPIO, I2C, SPI)

The OS can be found here and is a 600MB download
http://www.pidora.ca/