Comments on: IKEA Bekant adjustable table repair and hacking

By: Tomi Engdahl

Tomi Engdahl — Mon, 22 Apr 2024 11:14:36 +0000

Jatkojohto pöydän alla
https://www.seisuk.fi/products/jatkojohto-poydan-alla?currency=EUR&stkn=5e5bcc4393d5&gclid=EAIaIQobChMIieKXmNXVhQMVoRyiAx3k1wiaEAEYASABEgJ2EfD_BwE

Jos haluat järjestää johdot siististi, suosittelemme seuraavaa – kaapelikanava pöydän reunan alle, mihin voit asettaa näytön johdot, tietokonelaturin ja muut johdot nätisti ja kytkeä ne ruuveilla pöydän alle kiinnitettyyn jatkojohtoon. Näin syntyy tilanne, jossa pöydästä putoaa vain yksi johto, joka on jatkojohto.

By: Tomi Engdahl

Tomi Engdahl — Fri, 19 Apr 2024 07:36:49 +0000

LYFT: Standing Up For Better IKEA BEKANT Control
https://hackaday.com/2024/04/18/lyft-standing-up-for-better-ikea-bekant-control/

By: Alicent Jenner

Alicent Jenner — Tue, 01 Aug 2023 16:58:04 +0000

Repairing and hacking the IKEA Bekant adjustable table can be a rewarding DIY project. Online resources and creative modifications can help extend its lifespan and enhance its functionality. Happy tinkering! yusuke urameshi jacket

By: JamesOneil

JamesOneil — Sun, 16 Apr 2023 19:06:43 +0000

sss

By: Sophie Lanoix

Sophie Lanoix — Tue, 10 Jan 2023 18:15:56 +0000

Thank you so much for this info!

My Bekant was stuck in the standing position after a power outage. Resetting the module by pressing the up/down buttons at the same time fixed the issue. I had to move the desk to its lower position – I was worried for a while because it was doing doing the regular motor noise. But after it came down to its lowest point, it was working as usual.

By: Trilaen

Trilaen — Thu, 15 Dec 2022 06:09:12 +0000

I appreciate everything you have added to my knowledge base. Admiring the time and effort you put into your blog and the detailed information you offer. The Most Advanced Best Sms Blocker App For Android 2023, for Ultimate Protection and Privacy.Thanks

By: Peg

Peg — Fri, 11 Nov 2022 16:24:22 +0000

THANK YOU! This worked on mine as well. I’d tried unplugging and the hold for 10 seconds, but not in that exact order. Woot! I’ve had desk 6 years and was super sad when it stopped working suddenly.

By: singed1

singed1 — Fri, 22 Jul 2022 04:38:34 +0000

in inhibitions Flappy Bird and anger...

By: RobinP

RobinP — Thu, 11 Mar 2021 21:23:08 +0000

Thanks mate, worked perfectly. Thought I was going to need a new switch!

By: Eduardo Alves

Eduardo Alves — Sun, 07 Mar 2021 12:01:06 +0000

Guys, to make everything short. My Bekant stopped obeying commands. after a long search in the interned here is the correct reset procedure:
1- Just hold both buttons for 10 seconds
2- Only the “Down” button will be working
3- Command the table to go fully down, till the full stop, it will make it very slow
4- Done! Your table is back operational. No need to replace anything.

If it does not works, then and only then, thing about replacing parts.

Good luck!