Comments on: PA amplifier rack

By: Tomi Engdahl

Tomi Engdahl — Sat, 02 Aug 2025 07:16:19 +0000

https://youtu.be/zPtM1OWsO-4?si=1IyVxNdlp5O8KgmM

By: Tomi Engdahl

Tomi Engdahl — Sat, 02 Aug 2025 07:09:12 +0000

You can get your speakers over the audience then it will be able to better cover the back of the room.

By: Tomi Engdahl

Tomi Engdahl — Sat, 02 Aug 2025 07:01:19 +0000

HF driver should be 75% of your room height measured from the floor or roughly 7.5 feet. Your full range boxes should be aimed to an apex at 60% the length of the floor measured from the stage. You want your HF drivers to be above the tallest person in the room so the sound travels. So for a 12′ ceiling you want those HF drivers at ideally 9′. These are basic optimal conditions and most of the time for a standard average setup, usually not achievable without crank up or air lift stands.

By: Tomi Engdahl

Tomi Engdahl — Thu, 06 Mar 2025 14:51:31 +0000

https://hackaday.com/2025/03/06/rackmount-all-the-things-hi-fi-edition/

By: Tomi Engdahl

Tomi Engdahl — Tue, 11 Oct 2022 13:07:46 +0000

https://m.facebook.com/groups/avdisasters/permalink/3772475309547619/

By: Tomi Engdahl

Tomi Engdahl — Mon, 11 Oct 2021 09:34:17 +0000

Neutrik “D” Series 6.3 mm jack/SpeakON Combo (black, female, NLJ2MD-V)
https://www.customboards.fi/products/neutrik-d-series-1-4-jack-speakon-combo-nlj2md-v

By: Tomi Engdahl

Tomi Engdahl — Fri, 27 Aug 2021 06:54:41 +0000

https://www.cerwinvega.com/

By: uyiu

uyiu — Sun, 01 Aug 2021 06:44:57 +0000

Such this is very nice and amazing blog here thanks.

By: Tomi Engdahl

Tomi Engdahl — Sat, 19 Jun 2021 15:08:39 +0000

Topic: Rack build layout/design best practices, tips etc.
https://forums.prosoundweb.com/index.php?topic=158463.0