VCR Make	VCR Model	Problem	Solution
JVC	HRD180U	UNIT GOES TO STOP WHILE TAPE IS RUNNING. MODE MOTOR TURNS, SHUTS OFF	SCREW CONNECTION USED FOR GROUND LOOSENS & REEL & FG CIRCUIT
JVC	HRD180U	LOADING MOTOR CONTINUALLY RUNS THEN SHUTS OFF.	CHECK THE RETURN GROUND FOR THE MODE CONTROL SWITCHES.
JVC	HRD180U	LOOKS LIKE BAD VIDEO HEAD ON SP OK ON SLP.	REPLACE PRE-AMP BOARD ASSY (PN: PU36091A-04).
JVC	HRD180U	PICTURE POOR SNOWY (LOOKS LIKE BAD OR DIRTY HEAD CLEANING DOESN'T HELP)	REPAIR BAD CONNECTIONS BETWEEN HEAD PREAMP BOARD & SMALL BOARD WITH FLEX FOI
JVC	HRD180U	NO VIDEO ON PLAYBACK IN BOTH MODES	CHECK IC301 PIN 8 IF NO SIGNAL - PBF301 DEFECTIVE PU57399
JVC	HRD180U	TRACKING LINES IN PICTURE.	REALLIGNED GUIDE POSTS.
JVC	HRD180U	WON'T LOAD TAPE NO POWER-ON LIGHT & NO E-E AUDIO OR VIDEO	REPLACE VOLTAGE REGULATOR OUTPUT IC1 (PN: STK5481)
JVC	HRD180U	HEAD WON'T TURN POWER LIGHT WON'T GO ON & EJECT MOTOR WON'T STOP ON TIME	REPLACE STK5481
JVC	HRD180U	WON'T LOAD TAPE LOUD SQUEAL LOADING MOTOR KEEPS RUNNING & THEN SHUTSDOWN	REPLACE
JVC	HRD180U	INTERMITTENT OR NO CAPSTAN MOTOR ROTATION	REPLACE CAPSTAN MOTOR DRIVER IC 604 (PN: M546446)

***** End of VCR database search *****

If you didn't find what you were looking for, try these suggestions:

TechsWeb Repair Forum - Try posting your problem here for assistance.
Database Searching Hints - Check out these important hints and tips.
TechsChat Live - Chat live on-line with other technician members.