Remote feeding is a technology which enables operators to power several remote sites from a central location. Remote powering implies that the power equipment is not local but some distance away. Remote means that the powering and powered equipment are in separate buildings or at different external locations inside same building.It can be used as →
Remote powering implies that the power equipment is not local but some distance away. It is an alternative to commercial power, which can be hard to get and/or expensive. Remote means that the powering and powered equipment are in separate buildings or at different external locations inside same building. Line powering is a way to →
Remote powering implies that the power equipment is not local but some distance away. It is an alternative to commercial power, which can be hard to get and/or expensive. Remote means that the powering and powered equipment are in separate buildings or at different external locations inside same building. Line powering is a way to →
https://www.pv-tech.org/editors-blog/five-key-considerations-for-east-west-solar-design Around the world solar developers are turning array designs on their head and choosing to go east-west instead of south- or north-facing like their traditional cousins. While east-west solar arrays may have a reduced total output, the value of the electricity they produce is inherently higher in most markets – They are generating more →
https://www.edn.com/design/power-management/4460362/Finding-the-right-power-supply-technology-for-your-design In 2016, each person on the planet purchased an average of 111 semiconductor chips or integrated circuits. As the number of chips climbs, so does the need for greater power, space, and cost efficiency. In response, power device manufacturers have continued to evolve silicon-based technologies and develop new, wide bandgap materials such as gallium-nitride →
Here is GE MT03M motor protector: Contactor, Miniature, Overload Relay, 5.5-8.0A Range • Control circuit up to 690V • Power circuit up to 690V • Three-pole differential (phase unbalance protection) • Automatic ambient temperature compensation between – 25ºC and + 60ºC • Choice of manual or automatic reset • Direct connection to contactor or independent →
The lighting industry is undergoing a revolution driven by LED technology. LED is is now the dominant lighting technology for all new buildings and retrofits. Yet today, only a small percentage of LED fixtures are supplied with IoT sensors installed. It was estimated 140 million LED fixtures were expected to be distributed in the United →
I needed some connectors for quick electrical circuits prototyping. I saw this 20Pcs CH2 Quick Wire Connector Terminal Block Spring Connector pack at very low price of €1.37. So I ordered them to see if they are any good for nay use. At least they should be OK for low voltage low current circuits if →
A DIN rail is a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside equipment racks. DIN Rail Terminals are used in a wide range of applications including machinery, automotive industry, railway and process engineering. Here is a collection of videos on DIN Rail Terminals: What are →
https://spectrum.ieee.org/energywise/energy/the-smarter-grid/utilities-probed-as-potential-cause-of-california-fires Automatic reclosers are pole-mounted circuit breakers that can quickly restore power after outages. Reclosers make quick work of many line faults, the great majority of which result from temporary insults such as a tree branch striking a line or the electrocution of an unlucky squirrel. Reclosers usually try restarting a line 2-3 times before giving up →