I had a Huawei MediaPad T3 10″ (AGS-L09) tablet with broken glass. The repair at the official repair center costs more than buying a new tablet (both around 150 Euros), so repairing does not make much sense.
How about a DIY repair for broken screen? It seems to be doable according to several repair videos.
Huawei MediaPad 7 Youth Touchscreen Repair/Disassembly
HUAWEI MediaPad 10
The display was attached to plastic display panel frame with dual side tape. It took some work to remove it
The flat cable to screen can be removed by opening the connector “hinge” that hold the cable contacts in place. The flat cable was also glued to the back of the screen with tape like glue.
In this tablet the display was glued to glued to digitizer glass on this tablet model. So I can’t reasonably change just the digitizer. So I need to get the whole display+digitizer module. Found right new display+digitizer from ebay:
|Item ID: 352299801422|
|Estimated delivery: Mon. May. 21 – Mon. Jul. 2|
|Paid: $56.03 with PayPal|
New display in
I needed also 2mm wide dual sided tape to re-attack display to plastic holding frame
Now rebuild the tablet
Everything works again.