SMD soldering videos

SMD stands for Surface Mount Device and they are components that you solder on the surface of a circuit board.Soldering them is somewhat different from soldering “traditional” through hole mounted components. There are many SMD soldering tutorials, for example How To Do SMD Soldering Using a Soldering Iron and Sparkfun Surface Mount Soldering Tutorials. Youtube has many nice SMD soldering videos, here just few of them:

Arrow Tricks of The Trade – 05 – SMD Soldering – 02 – Solder Paste and Placing Components

SMD Soldering – Full

Surface Mount Soldering Tips and Tricks

Professional SMT Soldering: Hand Soldering Techniques – Part 2: Surface Mount Lead-free

Collin’s Lab – Surface Mount Soldering

Desoldering and soldering SMD components with a minimum of equipment.

Easy way to Solder Surface Mount Parts! – How I do it

Master Soldering: Surface Mount Fine-Pitch – Highly Recommended

Master Soldering: IPC-J-STD-001 Soldering Techniques

DIY USB microscope demo

SMD Soldering Microscope Footage – Andonstar ADSM302

SMD Soldering – Common Packages

SMD Soldering – Small Packages

SMD Soldering – QFP100 Package

SMD Soldering – QFN Package

SMD Soldering – SOIC SSOP Packages

SMD Soldering – PLCC Package

Master Soldering: IPC J-STD-001 Chip & MELF soldering

SMT Soldering 0402 Component/Installation

SMD Soldering Tutorial – an introduction to drag soldering. (beginners electronics)

Professional SMT Soldering: Hand Soldering Techniques – Surface Mount

Soldering SMD diodes – Soldering of several types of SMD diodes, with iron and hot air.

1.27mm pitch SOIC SMD IC Soldering

Drag Soldering for Surface Mount Chips

QFP package rework using ordinary soldering iron.

Soldering SMD chips to breakout boards.



  1. Tomi Engdahl says:

    PS4 Blue Light of Death – APU reball from begin to end (44 minutes)

  2. Tomi Engdahl says:

    Linus Attempts BGA Graphics Chip Repair! – Rossmann Repair Group, New York City

  3. Tomi Engdahl says:

    Reballing flip chip GPUs is BULLSHIT – the truth about dead laptop GPUs & repairing them.

    If you have a graphics card that’s worth less than a GPU replacement costs and it just died, and you can’t really afford anything newer, it’s OK to bake/roast/reball or whatever you call it. You must admit to yourself that what you’ve got on your hands is a steaming pile of garbage and that it won’t last a long time, but if you want to get that extra month or two out of it, go ahead and bake it. It’s probably gonna become an undead zombie for that brief period of time, and if you’re lucky you’ll be able to bake it again after that, but it’s not a proper solution by any means.

  4. Tomi Engdahl says:

    Reballing With Low Cost/HomeMade Equipement

    Reballing with a modified alogen stove for preheating and a hot-hair station. Reballing kit from china ;)

  5. Tomi Engdahl says:

    SMD Soldering – Small Packages

    SMD Soldering – Hand Soldering – Small Packages : 0805, 0603, 0402, 0201, 01005

  6. Tomi Engdahl says:

    SMD Soldering – Common Packages

    SMD Soldering – Hand Soldering – Common Packages : Resistor Array, SOT23-6, SOT23-3, SOT89, SOT223, TO252 (DPAK), TO263 (D2PAK), TO263-5, Mini PushButton, Crystal HC49, Aluminum Capacitor, Power Inductor

  7. Tomi Engdahl says:

    How to Solder SMD Components using Sand

    In this video I will show you a simple trick to solder SMD Components on PCB, using sand. This trick allows us to solder small to big any size PCB within a minute.

    DD Electro Tech : I solder smd with sand

    It’s only applicable if all of your SMD components are at the top layer.

    induction heating can make some sensitive component damage. better to switch off the induction heater before keeping the pcb for baking or use simple temperature controlled heater.

  8. Tomi Engdahl says:

    How to Solder Surface Mount parts (it’s easy!)

    Learn how to do surface mount soldering by watching Leo make an amazing Elektrosluch 3 device!

  9. Tomi Engdahl says:

    How to Make Hot Air Gun from Soldering Iron

    How To Make A Hot Air Gun Simple At Home

  10. Tomi Engdahl says:

    SDG #046 SMD Assembly Using Solder Paste Stencil and Hot Air with PCBs from JLCPCB

    Fast PCB assembly using solder paste for SMD SMT components

  11. BETTY HUNT says:

    The information in the blog is really very helpful. All the videos are easy to follow. Thanks for sharing the blog with us. Glad to visit here.


Leave a Comment

Your email address will not be published. Required fields are marked *