Bad AI circuits

Still, Ai is not capable enough to create correct diagrams on its own.

I wonder if it is posible to post working circuits to Facebook…… mostly only AI crap seems to be posted

Example from https://www.facebook.com/share/p/16vJCdn37B/

screenshot_20250707-182313_facebook

The left side circuit is almost correct, but for example the control button has only one wire in it, so it does not do anything.

On the right side circuit there is wrong transistor symbol (NPN symbol for PNP transistor). Also the LED has only one wire and there is half resistor in the picture. Even if those were corrected, that 19 kohms is a bit too high value for LED current limiting resistor so LED would be very dim.

Example from https://www.facebook.com/share/r/15v8Kc6Tmw/

screenshot_20250707-172854_facebook

This circuit does not work at all. If you try this, first the semiconductors will be fried due overvoltage for them: IR receiver is typically designed for 5V and the BC547 transistor has a maximum collector-emitter voltage (Vce) rating of 45V. When they are fried short, the resistor will start to smoke. Also the interconnection of IR receiver and BC547 is incorrect.

Example from https://www.facebook.com/share/p/16t7VXGDQz/

screenshot_20250708-222508_facebook

Here are some more examples:

screenshot_20250708-171321_facebook

Here the input and output are shorted in upper circuit. The lower circuit has input shorted, invalid input voltage range specified, non-working one wire capacitor and shorted LED.

Another example:

screenshot_20250708-152926_facebook

Here is a fixed version of circuit that could maybe work (looks OK at quick overview but not tested in practice) as a crude power inverter (square wave output with unstable and not clearly defined operating frequency).

screenshot_20250708-152859_facebook

8 Comments

  1. Aurelio Jin says:

    Current AI circuit drawing is still quite naive, lacking background knowledge – for example, circuits lacking pull-up resistors, filter capacitors, or incorrect power supply diagrams. I have seen these Incredibox types of diagrams shared widely, but anyone who tries to make them for real always encounters errors. Sharing circuits with real-life verification and proper measurements should be encouraged – otherwise it just creates more trash for newbies.

    Reply
  2. Geometry Dash says:

    Geometry Dash turns platforming into a rhythm sport. Music drives every level, and your job is to survive the syncopated madness with perfect timing.

    Reply
  3. Tomi Engdahl says:

    Electronics engineers don’t have to worry about AI taking over their jobs for a while. But Facebook really needs less of this.

    Reply
  4. Golf Hit says:

    It’s a great reminder of the limitations of current AI when Golf Hit it comes to generating technical and factual content, especially in specialized fields like electronics design.

    Reply
  5. ilimer says:

    As such, it serves as a useful reminder of the reality that existing AI isn’t up to the task of producing accurate and technical material, particularly in niche industries like electronics design. io games

    Reply
  6. doodle baseball says:

    Because of this, it serves as a helpful reminder of the fact that the artificial intelligence that is currently available is not capable of producing material that is accurate and technical, particularly in specialized areas such as electronics design.

    Reply
  7. Tomi Engdahl says:

    Facebook has been taken over by AI slop perhaps more than any other large social media site.

    Reply

Leave a Comment

Your email address will not be published. Required fields are marked *

*

*