Power supply output to a different voltage

Question seen at Facebook electronics discussion group:

I have 12 V ,1A DC Adapter, I want to convert it output up to 3 volts DC Power Supply for a “Gas Geyser Ignition” Circuit.
What will be do for it?

Easier solution is to get a new transformer / power supply with 3V output. There are many universal adjustable switch mode power supplies that can be adjusted to 3V.

You you can use fixed output linear regulator like AMS1117 (3.3V) or LM7803 (3V) or LM317 (adjustable to 3V with two resistors) to drop the voltage to the needed levels, but those Will get hot if you try to get any considerable current from 3V output. At 1A current at 3V output voltage from 12V input voltage they will produce 9W of heat! You will need a large heat-sink.

Alternatively, you can use an adjustable step-down DC-DC converter (sold as modules). I would recommend external DC-DC converter/regulator module to the voltage to 3V. I have tested somewhat expensive feature rich modules like DC-DC Step Down Power Supply Adjustable Module With LCD Display With Housing Case and Winners® 5A DC Adjustable CNC Step Down Power Supply.

There are also cheap modules that have just trimmer adjustments, some cheap modules can work OK but some cheap Chinese ready made modules do not work as promised.

The final idea is to modify the mains power supply you have, but this is only a viable option for experts who understand the operation of power supplies and the potential dangers related to them well. With some switch mode mains power supplies it is possible to adjust output voltage at some range by modifying the voltage feedback circuit (usually change resistor or zener diode value). To get basic understanding of the power supply technology check out my Switched-mode power supply tutorials post.

To understand what you need to change or if any changes are possible you need to know the circuit operation (preferably full circuit diagram available with someone who understands it or someone with good reverse-engineering skills) so that you know what to change properly. Mistakes can cause cause power supply malfunction (not work at all, unstable voltage, wrong voltage) or kill someone (electrocution and fire dangers).

For example Bebek Electronic has sold (and seems to sell) switch mode mains power supply circuit boards that could be used to to build power supplies (needs to be fitted inside protective case etc.) and can be adjusted to different voltages by changing a resistor value on the circuit board. HAKKURIVIRTALÄHDE 7.Volt 800mA and HAKKURIVIRTALÄHDE 6.5V 800mA product pages have full circuit diagrams and modification instructions for several different output voltages.


  1. urban treasures showflat says:

    I’ve been searching for some decent stuff on the subject and haven’t had any luck up until this point, You just got a new biggest fan!..

  2. Max says:

    In today’s modern era, there are so many technologies of so many similar functionalities that it is no wonder some share similar names. So what-is-the-difference-between-a-signature-stamp-and-an-electronic-signature is something people ask more often.

  3. Max says:

    document Signature for online submission of documents is the biggest requirement for students these days for applying for universities. For that matter it is good to search for pdf-editing which will make you understand things better. After using this it gets unnecessary to go somehwere else.

  4. Max says:

    I like viewing web sites which comprehend the price of delivering the excellent useful resource free of charge. I truly adored reading your posting. Thank you! bee pest control

  5. Max says:

    Thanks for the informative and helpful post, obviously in your blog everything is good.. Pest Control

  6. David says:

    You have done a amazing job with you website Pest Control Waco TX


Leave a Comment

Your email address will not be published. Required fields are marked *