DMX-512

LED DMX-512 lamp teardown

Here is a tear-down of 36W Par LED PAR CAN Stage Light with IR remote and DMX-512 control from wish.com sale. The light works well with DMX-512 control. Front and back On the back there are XLR3 DMX-512 connectors, address display and control buttons. Look inside On the left there is aluminum circuit board with

Enttec Open DMX DIY

DMX512 (Digital Multiplex) is a standard for digital communication networks that are commonly used to control stage lighting and effects. It was originally intended as a standardized method for controlling light dimmers up to 512 dimming channels. The first standard version was created in 1986, with subsequent revisions in 1990 leading to USITT DMX512/1990, ANSI

DMX-512 led light teardown

Here is a tear-down of a very cheap DMX-512 controlled LED light from Wish.com. It promised four colors (R, G, B and white) with 15W power and DMX-52 controlling. It has some reliability issues so I decided to take a look inside. Here are some pics of the product first. What is inside? Opening few

DMX-512 decoder for RGB LED

I have earlier written on using DMX-512 controlled dimmer to control mains powered lamps. It works, but is expensive and traditional incandescent lamps are going out of fashion. LEDs are the future, so a cheap easy to use board for controlling low voltage LEDs with DMX-512 signal are needed. To experiment with LED conrolling I

From DMX-512 to ArtNet

Yesterday I posted about DMX-512 dimmer. DMX-512 is a lighting industry standard way of controlling lighting equipment.DMX-512 allows for one controller (like a lighting desk or computer) to control many lights from many manufacturers. DMX-512 fundamentally provides 512 channels of 8-bit resolution (0-255) level control(which constitue a DMX ‘universe’) using serialĀ  RS-485 communications at 250

Four channel DMX-512 light dimmer

I happened to find this AnyTronics 4 channel dimmer thrown out as trash. It looks looks like Anytronics wall mounted dimmer 4 x 10 A that someone has adapted to become rack mounted and moved the DMX-512 address selection switches outside the device. I expected that Anytronics DP410 dimmer pack installation instructions would be about